CHEMICAL ENGINEERING
Due to international agreements, some equipment is reserved for specific market areas. We will respond to your enquiry offering the applicable rig. Most plants are available in either Pilot or table top version, with manual or computer control. Stainless steel and Borosilicate glass is used throughout
Absorption Column
These units can effectively demonstrate:
Obtain a desired product by feeding a gas through a descending liquid.
Removal of a gas from a liquid
Capturing a gaseous product Enquire
Aerobic Purification
Aereation Stage where oxygen is provided
Settling Stage where any undigested solids will settle
Disinfecting stage where disinfectant is added to
produce a purified effluent
Air Treatment Plant
Create smoke in an air flow system together with acid gas
Mechanical removal of dust by cycloning and filtration
Remove the gas by absorption
All stages are controlled and carefully monitored Enquire
Anaerobic Purification
Anaerobic treatment is carried out in the absence of oxygen.
Other variables such as temperature, pH, etc. allow for
a controlled conversion of complex organic pollutants mainly into
carbon dioxide and methane. Enquire
Coagulation Flocculation and Filtration
This is our latest development of a pilot plant which can be used in Chemical Engineering as well as in environmental studies.
All the latest technologies are involved. Enquire
Cooling Tower
Cooling Tower rig will familiarize the student with the
design parameters under different air and water flow rates Enquire
Crystallisation Pilot Plant
Batch crystallisation evaporating a solution under varying pressure conditions and then effect crystallization by cooling Enquire
Cyclone separator
Although cyclonic separation occurs in many of our other pilot plants, this rig allows the study of the cyclonic effect under various conditions Enquire
Distillation
We have the exact plant that you need; or we can build it
to your specifications – One of our plants has two different
columns which can be engaged as required. Enquire
Filtration
Water purification involving
Activated Charcoal
Nano filtration
Membrane
Ultra filtration Enquire
Flow Measurement Rig.
Self contained water circulating unit for studying
various flow measuring instruments:
Venturi, Orifice, Pitot tube, Flow meter, Measuring tank and
Manometer. Enquire
Fixed and Fluidised bed apparatus
Table top self contained unit with two beds, one for air
and one for water, to study fluid bubbling phenomena, such as
Pressure Drops, Fluidisation equations, etc. Enquire
Heat Exchangers
A number of heat exchangers are available:
Concentric
Shell and Tube
Jacketed vessel
Plate
A combination of any of the above in one unit Enquire
Mixing
For studying two materials under various conditions:
Mixing tank with removable baffles, variable speed agitator
with different impellers. Torque and speed measurement.
Air bubbles help in visualizing the process Enquire
Pressure measurement Rig
Includes manometers, pressure gauges, and dead weight
pressure tester.
A pump generates Pressure and Vacuum Enquire
Reactors
Batch reaction
Continuous reaction
Stirred reactors
Manual or computerized versions Enquire
Temperature Measurement Bench
Table top bench demonstrating various temperature
measuring devices, including: Resistance, Thermistors,
Thermocouple, Bimetallic, Vapour Pressure, Liquid expansion,
Etc. Enquire
Tray Drier
To study the principles of tray drying by a stream of hot
air, as often used in the food industry.
The relationship between temperature, humidity
and velocity of the air is investigated Enquire
Click on images to enlarge
Interactive DVD for skills training: Of Interest to Chem Eng!
NB –These courses are mainly in imperial units but this does not deter from its skill learning effectiveness as confirmed by our many metric clients
Air Compressor Repair Library (2 CD’s)
Reciprocating Air Compressors: Principles and Troubleshooting (A9001)
Reciprocating Air Compressors: Disassembly, Inspection, and Reassembly (A9002).
Bearings – Reducing Failure Rate Library (2 CD’s)
Failure Analysis (A8101)
Maintaining Bearings (A8102)
Centrifugal Pump Repair Library (2 CD’s)
Principles and Troubleshooting (A8901)
Disassembly, Inspection, and Reassembly (A8902)
Hand Tools and Measuring Instruments Library (2 CD’s)
Hand Tools (A8601)
Precision Measuring Instruments (A8602)
Industrial Hydraulic Power Library (5 CD’s)
Hydraulic System Operation (A9501)
Hydraulic Pumps, Pumping Principles, and Accumulators (A9502)
Pressure Controls (A9503)
Directional and Flow Controls (A9504)
Hydraulic Actuators (A9505)
Industrial Lubrication Library (2 CD’s)
Fundamentals of Lubrication (A8401)
Lubrication Maintenance (A8402
Mechanical Seals Library (1 CD)
Mechanical Seals (A9801)
Pipefitting Library (4 CD’s)
Pipefitting Materials and Layout (A8801)
Tubing and Threaded Pipe (A8802)
Preparing Piping for Installation (A8803)
Lagging and Insulation (A8804)
Pneumatic Power Library (1 CD)
Pneumatic Air Treatment (A7401)
Rigging and Lifting Library (3 CD’s)
Hand Operated Equipment (A8701)
Forklifts and Cranes (A8702)
Ladders and Scaffolding (A8703)
Valve Repair Library (2 CD’s)
Gate Valve Repair (A9101)
Globe and Control Valve Repair (A9102)
Analyzers Library (5 CD’s)
Principles of Process Analysis (AAS01)
Spectroscopic Analyzers (AAS02)
Gas Chromatographs (AAS03)
Air and Water Analysis (AAS04)
Process Sampling Systems (AAS05)
Boiler Control Library (3 CD’s)
Boiler Systems (ABC01)
Boiler Controls (ABC02)
Troubleshooting Boiler Controls (ABC03)
Control Valves Library (4 CD’s)
Body Types and Trim (ACV01)
Actuators and Positioners (ACV02)
Actuator and Positioner Maintenance (ACV04)
Controller Tuning Library (1 CD)
Controller Tuning (ACTAV)
Distributed Control Library (2 CD’s)
Distributed Control Fundamentals (ADC01)
Maintaining Distributed Control Systems (ADC02)
Electronic Maintenance Library (5 CD’s)
Pressure and Temperature Transmitters (AEM01)
Flow Transmitters (AEM02)
Level and Weight Transmitters (AEM03)
Transducers, Annunciators, Recorders (AEM04)
Electronic Controllers (AEM05)
Fundamentals of Industrial Measurement Library (4 CD’s)
Pressure Measurement (AFM01
Flow Measurement (AFM02)
Temperature Measurement (AFM03)
Level Measurement (AFM04)
Industrial Process Control Library (2 CD’s)
Single Loop Control (AIP01)
Multiple Loop Control (AIP02)
Instrument Calibration Library (5 CD’s)
Calibration Principles (AIC01)
Calibrating Pressure and Differential Pressure Instruments (AIC02)
Calibrating Temperature Instruments (AIC03)
Calibrating Flow Instruments (AIC04)
Calibrating Level Instruments (AIC05)
Instrumentation and Control Safety Library (3 CD’s)
Personnel Safety (AIS01)
Working with Hazardous Materials (AIS02)
Instruments in Hazardous Environments (AIS03
Interpreting Process Control Diagrams Library (1 CD)
Interpreting Process Control Diagrams (AIPCD)
Pneumatic Maintenance Library (3 CD’s)
Pneumatic Principles (APM01)
Sensors and Transmitters (APM
Controllers and Recorders (APM03)
Process Operations Library (3 CD’s)
Heating and Cooling Systems (APO01)
Distillation Columns (APO02)
Batch Process Systems (APO03)
Test Instruments and Devices Library (4 CD’s)
Pneumatic and Hydraulic Test Devices (ATI01)
Electronic Test Devices (ATI02)
Temperature and Frequency Test Devices (ATI03)
Analog and Digital Oscilloscopes (ATI04)
Troubleshooting Library (3 CD’s)
Troubleshooting Single Loop Control Systems (ATS01)
Troubleshooting Multi-Loop Control Systems (ATS02)
Troubleshooting Distributed Control Systems (ATS03)